Parameter=Default | Values | Explanation |
---|---|---|
help | Help This overview. |
|
stream=full | full MxPEG mxg |
Stream Type Image data in stream: full: full JPEG images MxPEG: MOBOTIX optimized JPEG mxg: MxPEG Clipfile; not server push |
needlength | Need Content-Length Send HTTP content-length for every frame in server push stream. Note: This option is not useful for browsers. |
|
fps=4 | Escaped string | Frames per Second Frame rate of streamed images: e.g. '3.0' streaming with 3 frames per second. Set to 0 for maximum rate. |
iframerefresh=0 | 0..60 | Seconds between new I-frames I-frame interval in seconds. 0: turn off Note: Using this option disables jpheaderrefresh and jpheaderupdate. |
jpheaderupdate=0 | 0..1000 | Frames between tables refreshs Table refresh count. 0: off, 1: every frame, 2: every second frame, ... |
jpheaderrefresh=10 | 0..60 | Seconds between table refreshs Table refresh time. 0: off, 1: every second, 2: every second second, ... |
framecount=0 | 0.. | Frame Counter Amount of images delivered before stream stops (0=infinite). |
fip=10.0.0.0 | Escaped string | Factory IP Will only deliver an image if the camera has this factory IP address. |
error=picture | picture empty content current |
Error Handling Sets the error handling options in case no image is available: picture: returns the "No frame available!" image empty: returns nothing content: returns only the content type current: returns the current.jpg image |
html | HTML Page With Stream Output HTML page including stream. |
|
preview | Preview Mode Display image data in preview mode. |
|
previewsize=160x120 | 160x120 320x240 640x480 |
Preview Size Select the size of the preview image. |
quality=60 | 10..90 | JPEG Quality Enter the desired JPEG quality. Only available if the parameter preview is specified. |
camera=both | right left both |
Preview Camera Select the sensor to display, if a double image is available. Only available if the parameter preview is specified. |